SAN LUIS
The San Luis Roman Shade is a flat shade with rear-facing pockets sewn across the width of the shade, that works well in most fabrics.
SAN LUIS’ rear facing pockets draw up into a neat, flat face with strong, horizontal lines that rarely need dressing in. For fabrics with horizontal stripes, we recommend REVERSE SAN LUIS.
• Lined or unlined
• Works well with a variety of fabric types
• Excellent blackout shade
• Inside or outside mount
Options
SAFETY
In 2015, the Window Covering Manufacturers Association (WCMA) introduced the industry’s first, 3rd party certification program designed to help consumers and retailers identify window coverings best suited for homes with young children.
- Install only cordless window covering in children’s sleeping areas.
- Move all cribs, beds, furniture and toys away from windows, and window coverings with cords – or replace with cordless versions.
- Keep all window pull cords and inner lift cords out of reach of children.
- Secure tasseled pull cord and inner lift cords.
- Ensure all continuous loop cords are permanently anchored to floor or wall.
- Ensure all cord stops are properly installed and adjusted to limit movement of inner lift cords.
- Lock cords into position whenever shades are lowered, including when resting on window sill.
- Never mount products with accessible back cords within reach of children.
- Replace window blinds, corded shades and draperies manufactured prior to 2001 with today’s safer products.
As part of compliance with WCMA’s child safety standards, all Carol’s Roman Shades are delivered with appropriate safety and warning labels in accordance with the latest Consumer Product Safety Council and the WCMA.
We also offer cordless and motorized window treatments for enhanced safety.
Questions? Call us: 1.800.422.1210, or email: Carol’s Roman Shades.
DOWNLOAD: SAFETY COMPLIANCE.PDF
MEASURING GUIDELINES
Measuring instructions for inside mount Roman Shade.
INSIDE MOUNT
A. Width: Measure width across at inside top, center and bottom of window. Use narrowest measurement when ordering.
Specify on order form if inside clearance has been allowed. We will deduct up to ¼” from each side.
B. Length Measure height of window from top of opening to top of sill. No allowance is made for length.
Measuring for outside mount Roman Shade.
OUTSIDE MOUNT
A. Width: Measure exact width of area to be covered. It is recommended that the shades extend past the actual window opening by a minimum of 2” on each side. Specify finished shade width; no allowance will be made.
B. Length Measure length of area to be covered allowing a minimum of 2½” at the top of window to accommodate headerboard and brackets. Provide the finished shade length, as no allowance will be made. At this point you may want to take into account the stackage of the shade. On shade styles with a pouf, please specify whether length given is bottom, or high point of pouf.
Bay window measuring instructions.
BAY WINDOW MOUNT
A. Width: Measure exact width of area to be cSave & Exitovered. It is recommended that the shades extend past the actual window opening by a minimum of 2” on each side. Specify finished shade width; no allowance will be made.
B. Length Measure length of area to be covered allowing a minimum of 2½” at the top of window to accommodate headerboard and brackets. Provide the finished shade length, as no allowance will be made. At this point you may want to take into account the stackage of the shade. On shade styles with a pouf, please specify whether length given is bottom, or high point of pouf.
Measuring for corner windows.
CORNER WINDOW 90°
Please include diagram when ordering CORNER WINDOW shades. Give actual back wall measurements for A & B. We will make allowance for a 90° mitered installation. If angle is ± 90° please supply angle of corner.
PLEASE NOTE: When Carol’s Roman Shades, Inc. makes deductions for CORNER and BAY windows, we plan for a mitered corner installation. We do not make deductions for a butt/pass installation unless specifically asked to do so on order forms.
DOWNLOAD: MEASURING INSTRUCTIONS.PDF
Questions? Call us: 1.800.422.1210, or email: Carol’s Roman Shades.
OPERATING OPTIONS
CORD LOCKS
Cord locks are available at no charge on most shades*, but must be requested when you place your order. Size limitations apply.
*Additional charge for arched shades
CONTINUOUS CORD SYSTEM – EASY RISE/SLIDE WINDER SYSTEM
The Continuous Cord System* is a tension based system that eliminates the need for a wall cleat, and also works as a cord lock. To accommodate this system, the depth of the headerboard must be increased to 2.25” (57.15 mm) deep, minimum shade width is 20” (508mm), maximum width is 120” (3.048m)
Note: For Continuous Cord System to function properly shades must not rest on surface when lowered.
- Up to 84” (2.134m) wide $120
- 85” (2.16m) to 120” (3.048m) wide $160
*Arched shades add $100
MOTORIZED SHADES
Motorized shades require a Minimum return 2.25” (57.15mm). Prices vary according to battery operation and size. Please email info@carolsromanshades.com or call 1.800.422.1210 for custom quote.
- Sonesse 30 Minimum width 20” (508mm)
- Sonesse 40 Minimum 4” (102mm) return
-
Sonesse 50 Minimum 4” (102mm) return
CORDLESS SHADES
Our cordless spring roller system complies with current safety standards and eliminates concerns about safety and unsightly aesthetics often associated with dangling cords. The cordless shade system requires a minimum of 2.25” (57.15 mm) headerboard size. Minimum and maximum shade width and length apply. Maximum shade weight is 20lbs.
- Up to 36” (91.44m) wide $170
- 36” (91.44m) to 60” (1.524m) wide $200
- 60” (1.524m) to 78” (1.98m )wide $230
CORD LOCK OPERATING SYSTEM
Manual locking system secures shade at any height is a standard feature of our Cord Lock Operating System. Cord cleats offered in the following color options upon request:
- Clear
- Bronze
- White
ROLL-EASE OPERATION SYSTEM
The RollEase™ system keeps shade hanging level by wrapping individual lift cords around a rotating and traversing shaft. Innovative clutch technology easily raises and lowers blind by pulling on the control cord which allows blinds to be easily repositioned. Stop pulling down on the control cord and the clutch automatically holds the shade securely in position.
Available in 1.5” and 2.5” (standard) width headrails. Cord colors:
- White
- Camel
- Brown
- Black
- Metal Bead Chain (optional, silver, bronze)
Questions? Call us for custom quotes and other information: 1.800.422.1210, or email: Carol’s Roman Shades.
DOWNLOAD: OPERATING OPTIONS.PDF
WARRANTY
Carol’s Roman Shades, Inc. guarantees the workmanship and materials on all our products for one (1) year from the completion of your order.
Carol’s Roman Shades, Inc. is responsible for the fabrication of orders to the designer’s specifications. The designer is responsible for all design choices, including suitability of fabric and style selections.
When requesting warranty service, please provide the customer service representative with a thorough description of the problem and CRS will issue a Return Authorization.
Once the product is returned to us, we’ll determine the cause of the problem. If a fabrication error is the cause, CRS will repair or replace the product within 10 working days of receipt of all materials needed. This warranty is limited to repair or replacement to original specifications only.
If you should have a problem with an order, please call our customer service department at 1-800-422-1210, or email us: Carol’s Roman Shades.
DOWNLOAD: WARRANTY
FORMS
Find all our specifications and guidelines for ordering your Carol’s Roman Shades in PDF format.
