REVERSE PLEAT PANELS
Let us help you realize your design vision. The perfect complement to our Roman Shades collection, we bring you a full selection of draperies and timeless panel treatments. Meticulously handcrafted, with generous 6″ hems, hand-sewn corners, and over locked seams, all our draperies are finished to the exacting standards customers expect from Carol’s Roman Shades.
Options
MEASURING
INSIDE MOUNT
A. Width: Measure width across at inside top, center and bottom of window. Use narrowest measurement when ordering.
Specify on order form if inside clearance has been allowed. We will deduct up to ¼” from each side.
B. Length Measure height of window from top of opening to top of sill. No allowance is made for length.
Measuring for outside mount Roman Shade.
OUTSIDE MOUNT
A. Width: Measure exact width of area to be covered. It is recommended that the shades extend past the actual window opening by a minimum of 2” on each side. Specify finished shade width; no allowance will be made.
B. Length Measure length of area to be covered allowing a minimum of 2½” at the top of window to accommodate headerboard and brackets. Provide the finished shade length, as no allowance will be made. At this point you may want to take into account the stackage of the shade. On shade styles with a pouf, please specify whether length given is bottom, or high point of pouf.
Bay window measuring instructions.
BAY WINDOW MOUNT
A. Width: Measure exact width of area to be cSave & Exitovered. It is recommended that the shades extend past the actual window opening by a minimum of 2” on each side. Specify finished shade width; no allowance will be made.
B. Length Measure length of area to be covered allowing a minimum of 2½” at the top of window to accommodate headerboard and brackets. Provide the finished shade length, as no allowance will be made. At this point you may want to take into account the stackage of the shade. On shade styles with a pouf, please specify whether length given is bottom, or high point of pouf.
Measuring for corner windows.
CORNER WINDOW 90°
Please include diagram when ordering CORNER WINDOW shades. Give actual back wall measurements for A & B. We will make allowance for a 90° mitered installation. If angle is ± 90° please supply angle of corner.
PLEASE NOTE: When Carol’s Roman Shades, Inc. makes deductions for CORNER and BAY windows, we plan for a mitered corner installation. We do not make deductions for a butt/pass installation unless specifically asked to do so on order forms.
DOWNLOAD: MEASURING INSTRUCTIONS.PDF
Questions? Call us: 1.800.422.1210, or email: Carol’s Roman Shades.
VALANCES
KICK PLEAT VALANCE
This valance is flat across the face and has kick pleats at the corners. If designed for use over a Roman Shade, the pleats allow the shade to pull up under the valance without pulling the returns away from the wall.
This valance is flat across the face and has kick pleats at the corners. If designed for use over a Roman Shade, the pleats allow the shade to pull up under the valance without pulling the returns away from the wall.
BOX PLEAT VALANCE w/THREE PLEATS
The valance has kick pleats at the corners and a box pleat in the center or box pleats across the width of the face. If designed for use over a Roman Shade, the pleats allow the shade to pull up under the valance without pulling the returns away from the wall.
BOX PLEAT VALANCE w/VARIABLE PLEATS
This valance has kick pleats at the corners, and a box pleat in the center or across the width of the face. If designed for use over a Roman Shade, the pleats allow the shade to pull up under the valance without pulling the returns away from the wall.
FLAT VALANCE w/NO RETURN
Fabric falls off face of headerboard, does not return to wall on sides. Recommended for Inside Mount.[/one_half_last]Questions? Call us for custom quotes and other information: 1.800.422.1210, or email: Carol’s Roman Shades.
DOWNLOAD: VALANCES.PDF
Rods, Brackets & Rings
DOWNLOADS:
RODS, BRACKETS & RINGS.PDF
Questions? Call us for custom quotes and other information: 1.800.422.1210, or email: Carol’s Roman Shades.
FORMS
Find all our specifications and guidelines for ordering your Carol’s Roman Shades Draperies in PDF format.
SAFETY
In 2015, the Window Covering Manufacturers Association (WCMA) introduced the industry’s first, 3rd party certification program designed to help consumers and retailers identify window coverings best suited for homes with young children.
- Install only cordless window covering in children’s sleeping areas.
- Move all cribs, beds, furniture and toys away from windows, and window coverings with cords – or replace with cordless versions.
- Keep all window pull cords and inner lift cords out of reach of children.
- Secure tasseled pull cord and inner lift cords.
- Ensure all continuous loop cords are permanently anchored to floor or wall.
- Ensure all cord stops are properly installed and adjusted to limit movement of inner lift cords.
- Lock cords into position whenever shades are lowered, including when resting on window sill.
- Never mount products with accessible back cords within reach of children.
- Replace window blinds, corded shades and draperies manufactured prior to 2001 with today’s safer products.
As part of compliance with WCMA’s child safety standards, all Carol’s Roman Shades are delivered with appropriate safety and warning labels in accordance with the latest Consumer Product Safety Council and the WCMA.
We also offer cordless and motorized window treatments for enhanced safety.
Questions? Call us: 1.800.422.1210, or email: Carol’s Roman Shades.
DOWNLOAD: SAFETY COMPLIANCE.PDF
